Machine Control for Fisher & Paykel GWL11US IWL12 IWL15 washers. IMPORTANT NOTE- PLEASE READ CAREFULLY! All machine controls are factory reconditioned. This is the only option available for this part. This is as dictated by the factory. This part is not available any longer as a "new" part. Electronic parts are NOT RETURNABLE. THE REPLACEMENT PART MAY ALSO VARY IN APPEARANCE FROM YOUR ORIGINAL PART. All controls carry a 90 Day replacement warranty.

Fisher & Paykel complete Drain Hose and harness Assembly for GWL11US, IWL12US and IWL15 US. WILL NOT FIT GWL15 or any model not listed here. This kit includes the complete drain hose, lower wiring harness and water pressure sensor tube. The drain hose by itself is not sold as a separate part. You must purchase this kit to replace your drain hose.

Hot Water Inlet valve for Fisher & Paykel GWL10 US Washers. Direct replacement for old part #426559. NOTICE! THIS PART IS ONLY FOR GWL10 MODELS! WILL NOT FIT GWL11 and UP! It is always a good idea to replace BOTH valves as a set. If one is clogged, chances are the other will have issues.

Cold Water Inlet valve for Fisher & Paykel GWL10 US Washers. NOTICE! THIS PART IS ONLY FOR GWL10 MODELS! WILL NOT FIT GWL11 and UP! It is always a good idea to replace BOTH valves as a set. If one is clogged, chances are the other will have issues.

Fisher & Paykel drain hose and harness assembly for GWL10 series washers. Includes drain hose and wire harness as supplied by the factory. Direct replacement for obsolete part # 426870. THIS HOSE IS ONLY FOR THE GWL10 SERIES. DO NOT ORDER THIS PART UNLESS YOU HAVE A GWL10 SERIES WASHER!

Hot Water Inlet valve for Fisher & Paykel GWL11/IWL12 US Washers. Connector mount on older valves may appear different than photo. This is the correct factory replacement for all GWL11 and IWL12 Models.

Cold Water Inlet valve for Fisher & Paykel GWL11/IWL12 US Washers. Connector mount on older valves may appear different than photo. This is the correct factory replacement for all GWL11 and IWL12 Models.

420296P Rotor Position Sensor for Fisher & Paykel Washers. Replaces obsolete #'s 425221P 420569P .Fits GWL03 with product code 99606, GWL08 96107, GWL10 96144 96167, GWL11 with product codes 96151 96151-B, IWL12 with product codes 96154 96154-B 96187, IWL15 with product codes 96192 96192-A. Typically needed when fault code 130 or 131 is generated. DOES NOT FIT MODELS GWL15 and above!

Fisher & Paykel Out-Of-Balance Switch Assembly. Includes Wiring Harness. NOTE! This kit is a complete REPLACEMENT for the older style switch and may appear very different than your original. ALL parts in kit must be replaced. Replacement for items 426597 425626

Lid Lock Assembly for Fisher & Paykel Washers. Includes Wiring Harness. Fits Models GWL11, IWL12 and IWL15. WILL NOT FIT GWL 15 or IWL16 Series!

Display Board for Fisher & Paykel  IWL12 and IWL15 Series. Fits these models/product codes: IWL12 96154 96154B IWL15 96192 96192A

420794P Fisher Paykel Washer Shaft Drive Kit. Driveshaft assembly for Fisher Paykel Washers. Includes agitator nut and rotor cap.

420807 Fisher & Paykel Control Panel overlay for Model GWL11 and GWL15 US washers. Part is a peel-and-stick part. Not returnable. May differ slightly in appearance from original. Genuine Fisher Paykel Factory Replacement Part.

Water inlet nozzle and elbow for Fisher & Paykel EcoSmart Washers. Replaces old Nozzle part # 420143 and Elbow # 425974P. The nozzle may appear different than your original nozzle. This is the most current nozzle from the factory and previous design is obsolete. NOTE! If you need this part you may be overloading your washer! This part can be damaged by having too many items in the washer.

420952P Tub Support Rods for Fisher & Paykel Smartdrive and Intuitive ECO washers GWL03 GWL08 GWL10 GWL11 GWL15 IWL12 IWL16 WA37T26. Includes all 4 rods. Spring and shock for tub support. Replaces obsolete part # 426750P. If you would like to purchase just a single rod assembly, we offer them under part #420952P-S NOTE: WILL NOT FIT "AQUASMART" SERIES. Use part # 421127P for the Aquasmart washers.

420952P-S Tub Support Rod for Fisher & Paykel Smartdrive and Intuitive ECO washers GWL03 GWL08 GWL10 GWL11 GWL15 IWL12 IWL16 WA37T26. This is a SINGLE rod. Spring and shock for tub support. Replaces obsolete part # 426750P. If you would like to purchase a complete set of 4, we offer them under part #420952P NOTE: WILL NOT FIT "AQUASMART" SERIES. Use part # 421127P for the Aquasmart washers.

Water inlet valve assembly for Fisher & Paykel AQUASMART series washers. DOES NOT FIT ECOSMART! Fits these models and product codes: WL26CW1 93615-A 96215-B WL26CW2 96137-A WL37CW2 96114-A 96114-B WL37T26DW1 96215-A 96215-B NOTE THIS IS A 4-COIL VALVE. DOES NOT FIT 5-COIL models.

Support Straps for Fisher Paykel Aquasmart washers. Set of 4. Fits on each corner of machine from tub support rods to tub collar. Always replace as a set. For all "Aquasmart" washers.